**PO2-100U Pulse Oximeter and Plethysmography Sensor**

The PO2-100U Pulse Oximeter and Plethysmograph Sensor measures blood oxygen saturation (SpO2) and pulse pressure (plethysmography) using a non-invasive, dual-wavelength light transmittance based finger clip.

The PO2-100U connects to the USB bus of a Windows-based PC or Macintosh computer. It is controlled and data is recorded through built-in iWorx LabScribe Recording Software.

The PO2-100U is intended for investigational use.

Software: LabScribe data acquisition and analysis software is included.

iWorx PO2-100U Specifications

• Oxygen Saturation Range: 80 to 100%
• Pulse Rate Range: 18 – 300 BPM
• Measurement Wavelength: Red – 660 nanometers Infrared – 925 nanometers
• Accuracy: SpO2 70 – 100% + 1 SD

Temperature

• Operating: 0 – +50 degrees C
• Non-operating: -30 – +50 degrees C

Humidity

• Operating: 10 – 90% non-condensing
• Non-operating: -30 – +50 degrees C

Power

• Power Draw: 60 mW – typical operating
• Voltage Output: 2 – 6 VDC – typical operating
• Output Digital Signals: 0 – 5 V (nominal)
• Patient Isolation Dielectric Withstand: Meets IEC 60601-1
• Leakage Current: not applicable

Dimensions

• Finger Pick-up: 1.26 in. x 1.25 in. x 2 in. (32 mm x 32 mm x 51 mm)
• Box: 2.27 in. x 2.4 in. x 1.0 in. 57 mm x 61 mm x 25 mm)